Take photos of all (4) sides of the trailer and the plug for the final walkthrough form and submit the form for the lockbox code.
Enter the code provided via text after submitting the form.
Unlock latch lock and hold onto the latch lock.
Push the coupler handle forward (towards the vehicle).
Raise or lower the jack to the prover elevation of the hitch by using the crank, and lower the trailer onto the ball. Remove the the pin to rotate the jack horizontally.
Squeeze the coupler neck closed and push the handle back (towards the trailer) and re-install the latch lock.
Hook the chains AND the emergency brake cable to the hitch receiver system on the tow vehicle.
Plug in the wire harness and test the running light, brakes, and turn signals.
Make sure the wire harness is not is not in danger of dragging.
Send photos of your haul for marketing!
Un-lock the latch lock and open the coupler.
Lower remove the pin and rotate the jack vertically, use the hand crank to lower the jack the rest of the way down.
Un-hook the chains and emergency brake cable and place them on the frame.
Un-plug the wire harness and coil it around the jack.
Install the latch lock after the coupler is closed..
Send a few photos to my cell number (623)-343-6010.